2015년 9월 22일 화요일

How to collect and analyze sensing data of IoT platform

How to collect and analyze sensing data of IoT platform

This post shows how to connect IoT platform to Cloud service and how to display sensing data for graphical analysis.

data.sparkfun.com

  • What is Phant?

    • Phant is a open source cloud server platform by powered Sparkfun Electronics.
    • Sparkfun created data.spartfun.com ,which is a free cloud service running phant. -
    • To collect data from your device to cloud service, you just need to register a new stream.
    • After register, you get two keys for accessing the data; one is q private key is required to update that stream, other is a public key grants access to any other stream on the service.
    • All communication with Phant is carried out over HTTP. So, your device should be acted as HTTP Client.
    • http://data.sparkfun.com/input/[publicKey]?private_key=[privateKey]&[field1]=[value]&[field2]=[value]
  • Phant : Phant.io

    Phant is a modular node.js based data logging tool for collecting data from the Internet of Things. It is the open source software that powers data.sparkfun.com, and is actively maintained by SparkFun Electronics. Phant is short for elephant. Elephants are known for their remarkable recall ability, so it seemed appropriate to name a data logging project in honor of an animal that never forgets.

analog.io

  • 3rd party of data.sparkfun.com
  • Graphing front end

    analog.io is a full stack IoT web service and hardware platforms where people can create connected devices and share them with the world. It is designed to solve all kinds of world problems from air pollution, improving farm output or studying the bee population. It is really only limited by the users imagination. (for more detail)
    2015-09-22_19-36-25

Prepare materials

  • Hardware
    IMG_20150922_195307

    • mbed platform : WIZwiki-W7500

      • ARM® Cortex™-M0 Core 48MHz
      • 128KB Flash memory
      • 16KB to 48 KB SRAM (Min 16KB available if 32KB socket buffer is used, Max 48KB available if no socket buffer is used)
      • Hardwired TCP/IP Core (8 Sockets, MII: Medium-Independent Interface)
      • 12-bit, 8ch ADC
      • 53 I/Os
      • 1ch Watchdog, 4ch Timers and 8ch PWM
      • 3ch UART
      • 2ch SPI
      • 2ch I2C

    • Sensors (ywrobot easy module shield v1): DHT11
      ywrobot

  • Registrations

    • data.sparkfun.com
      To create a data stream, head over to data.sparkfun.com, and click “CREATE”.

      • Create a Data Stream

        2015-09-22_20-06-54

          * Fields - This comma-separated list of words defines data stream to post a list of unique values.
  * Stream Alias - This testbox defines domain name for you Data Stream

      • New Stream example: After creating a data Stream, you will confirm URL, Keys for accessing for your data stream.
        E_New Stream1

Software

2015-09-22_20-28-32

  • Used Lib
    • WIZnetInterface Lib. : for Ethernet connectivity of W7500
    • DHT Lib. : for DHT11 sensor

Codes flow

  • mbed.org repositories : https://developer.mbed.org/users/embeddist/code/Data_Sparkfun_io/

  • Configuration Arduino’s I/O pins

    /*
*Input Pins, Misc
* D4 - Temp. and Hum. Sensor
* D3 - Push buttom
*/
DHT sensor(D4, DHT11);
DigitalIn  triggerPin(D3);

  • Configuration Phat Stuff

    /*
* Phant Stuffs
* Insert your publicKey
* Insert your privateKey
* Generat Fileds; 'Files name shoud be same "field name" in Create Stream form'
*/
char publicKey[] = "insert_your_publicKey";
char privateKey[] = "insert_your_privateKey";
uint8_t NUM_FIELDS = 2;
char fieldNames1[] = "hum";
char fieldNames2[] = "temp";

  • Network Configuration : DHCP Client

     // Enter a MAC address for your controller below.
  uint8_t mac_addr[6] = {0x00, 0x08, 0xDC, 0x00, 0x01, 0x02};     

  printf("initializing Ethernet\r\n");
  // initializing MAC address
  eth.init(mac_addr);

  // Check Ethenret Link
  if(eth.link() == true)   printf("- Ethernet PHY Link-Done \r\n");
  else printf("- Ethernet PHY Link- Fail\r\n");

  // Start Ethernet connecting: Trying to get an IP address using DHCP
  if (eth.connect()<0)    printf("Fail - Ethernet Connecing");

  // Print your local IP address:
  printf("IP=%s\n\r",eth.getIPAddress());
  printf("MASK=%s\n\r",eth.getNetworkMask());
  printf("GW=%s\n\r",eth.getGateway());

  • HTTP Client

    /*
*    - If the trigger pin (3) goes low, send the data.
*        - Get sensing datas by using analogread()
*        - Call postData
*            - Open socket as TCP Client
*            - Try to connet TCP server (data.sparkfun.com); if needs, do DNS clinet for getting IP address of server
*            - Make query string based on Phant frame
*            - Send query
*            - Check for a response from the server, and route it out the serial port.
*/

  while(1)
  {
      if(triggerPin ==0)
      {
          sensor.readData();
          c   = sensor.ReadTemperature(CELCIUS);
          h   = sensor.ReadHumidity();
         printf("Temperature in Celcius: %4.2f", c);
         printf("Humidity is %4.2f\n", h, dp, dpf);

        sock.connect("data.sparkfun.com", 80);

        snprintf(http_cmd, http_cmd_sz,  "GET /input/%s?private_key=%s&%s=%2.2f&%s=%3.3f HTTP/1.1\r\nHost: data.sparkfun.com\r\nConection: close\r\n\r\n", 
                                          publicKey, privateKey, fieldNames1, h, fieldNames2, c);
        sock.send_all(http_cmd, http_cmd_sz-1);

        while ( (returnCode = sock.receive(buffer, buffer_sz-1)) > 0)
        {
            buffer[returnCode] = '\0';
            printf("Received %d chars from server:\n\r%s\n", returnCode, buffer);
        }

        sock.close();         
      }

      wait(2);
  }

  • Make Query string over HTTP

      http://data.sparkfun.com/input/[publicKey]?private_key=[privateKey]&hum=[value]&temp=[value]

      snprintf(http_cmd, http_cmd_sz,  "GET /input/%s?private_key=%s&%s=%2.2f&%s=%3.3f HTTP/1.1\r\nHost: data.sparkfun.com\r\nConection: close\r\n\r\n", publicKey, privateKey, fieldNames1, h, fieldNames2, c);
  sock.send_all(http_cmd, http_cmd_sz-1);

Demo

Serial Monitor

  1. DHCP Clinet message
  2. Press the button to send query to server.

  3. Confirm the response message on serial terminal and data.spark.com/your_stream

     initializing Ethernet
 - Ethernet PHY Link-Done
 IP=192.168.11.224
 MASK=255.255.255.0
 GW=192.168.11.1
 Temperature in Celcius: 27.00Humidity is 55.00
 Received 299 chars from server:
 HTTP/1.1 200 OK
 Access-Control-Allow-Origin: *
 Access-Control-Allow-Methods: GET,POST,DELETE
 Access-Control-Allow-Headers: X-Requested-With, Phant-Private-Key
 Content-Type: text/plain
 X-Rate-Limit-Limit: 300
 X-Rate-Limit-Remaining: 298
 X-Rate-Limit-Reset: 1441353380.898
 Date: Fri, 04 Sep 20
 Received 299 chars from server:
 15 07:46:03 GMT
 Transfer-Encoding: chunked
 Set-Cookie: SERVERID=phantworker2; path=/
 Cache-control: private

https://data.sparkfun.com/office_monitoring

2015-09-04_16-39-51

analog.io: import stream from data.sparkfun.com/your_stream

  • How to Import Stream

    1. Click ‘+Import Stream’ button on menu
      2015-09-04_16-38-19

    2. Select ‘Sparkfun’ on Host drop box and input Public key of data.sparkfun.com
      2015-09-04_16-38-36

    3. Confirm your Stream
      2015-09-04_16-36-04
작성자: 시간:
라벨: , , , ,

댓글 없음:

댓글 쓰기

피드 구독하기: 댓글 (Atom)